Phoenix Carbon Fibre pole 30 ft
The new Phoenix X range are designed with the user in mind and also your pocket!
So what has the Phoenix got that other poles haven’t….
Faster and easier to use
The simple beauty of the Phoenix is the clamping system. This has been designed completely with the end user in mind. We’ve looked into how these poles work on a day to day basis and how we can improve your working life.
One finger Operation
By having a one finger flip action on the clamp levers, the user can work faster than ever before. Sideways (transverse) clamps have a certain awkwardness when being used as the thumb, which tends to be the main finger to use to open the clamps, which operates in an unnatural way.
The Phoenix clamp is designed to flip open in the quickest and easiest way that is natural to the hand and can be used by any finger so you wont know how you ever managed before! Faster and easier for you and your workforce.
Considering how long water fed poles have been in use, no one has actually addressed the issues the day to day user experiences. Ask any window cleaner the one thing that annoys them about pure water cleaning and it will be the clamps pinching the skin should the pole section move down a bit sharpish. Time and time again this, results in a nasty pinch on the operators hand. Not anymore, Facelift, through design, have eliminated the problem – but it doesn’t stop there.
Nuts for fine tuning
Unlike some poles, over tightening the nut at the side of the clamp will not affect the wear of the sections. Where a lot of clamps rub continually against the pole sections when extending and collapsing the pole, the Phoenix clamp springs open on release,freeing up the pole so it runs smoothly with minimum wear on the section.
One bug bear of sideways (transverse) clamps is that they catch on sills, gutters, etc and pop open which causes the section to slide down and the user has to re-extend his pole. Time consuming and annoying all in one.
The Phoenix levers have been specially designed to bounce over ledges, etc and prevent this nuisance from happening. Another first in water fed pole design.
The Red One
The red lever at the top of the pole is for the Ultra Lite section or the quick release adapter. In coming months a range of quick release, goose neck and brush heads will be released that can inserted into this top section.
The red colouring is basically there to remind you not to open the clamp unless removing adapter or using the Ultra-Lite section when it’s needed.
The Phoenix X is a full carbon pole (with insulation base) for the maximum strength, rigidity and lightness.
|Carbon 18||18 ft||22 ft||4ft 10″||980g||4|
|Carbon 22||22 ft||26 ft||4ft 10″||1.2kg||5|
|Carbon 25||25 ft||29 ft||5ft 7″||1.4kg||6|
|Carbon 26 UL||26 ft||30 ft||5 ft||1.4kg||6|